* Denotes Required Field
* Name:
Title:
* Organization:
* Address:
* City:
* State:
* Zip Code:
* Email Address:
* Phone Number:
* Fax Number:
Your Part Number:
* Quantity to Quote:
Mandatory Specifications (fill in only those required):

1. To work over in. diameter shaft.

2. Outside Diameter:
a. in. maximum or
b. in. ± in.

3. Inside Diameter:
a. in. minimum or
b. in. ± in.

4. Torque:
lb.•in. ± lb.•in. at 1= °.
lb.•in. ± lb.•in. at 2= °.

5. Length of space available: in.

6. Maximum wound position:
turns or ° from free position.

7. Length of moment arm (R): in.

8. Direction of helix:

9. Type of ends:

Advisory Data:

1. Wire diameter: in.

2. Mean coil diameter: in.

3. Number of coils:

4. Rate lb.•in. per turn (360°).

5. F = ° free angle reference.

 
Special Information:

1. Type of material:

2. Finish:

3. Frequency of rotation, cycles/sec, and working range, = ° to = ° deflection.

4. Operating temperature: °F

5. End use or application:

6. Other:
 
Home | About Us | Contact Us | Factory Tour | Company News
Custom Springs | Extension Springs | Compression Springs | Torsion Springs | Wire Forms, Drawbars & Stampings | RFQ: Compression Spring | RFQ: Extension Spring | RFQ: Torsion Spring | RFQ: Wire form, Drawbar, Stamping | Glossary of Terms		  
  All contents & photography copyright © 1984-2007 Patrick Manufacturing, Inc. All Rights Reserved.
Site design & hosting by Visual Edge Design.